menu.trunks = Trunks
module.trunks = Trunks
trunks = Trunks
trunks.advanced = Advanced
trunks.allow_guest_calls.warning = <i>Allow Guest Calls</i> option must be enabled in the {0}|Security if you want to define source IP addresses. Go to {1}
trunks.always = Always
trunks.always.tooltip = Always use the CID that is defined for this Trunk. This will override any CID defined on either the Outbound Route or the Extension.
trunks.channel_groups = Channel Group
trunks.channel_id.invalid = Channel cannot be empty
trunks.channels = Channel
trunks.channels.tooltip = The channel used by this trunk
trunks.class_of_service_id = Class of Service
trunks.class_of_service_id.tooltip = The dial plan is segmented into sections, called Classes of Service (CoS). CoS are the basic organizational unit within the dial plan, and as such, they keep different sections of the dial plan independent of each other. PBX uses CoS to enforce security boundaries between the various parts of the dial plan, as well as to provide different classes of service to different groups of users.
trunks.class_of_service_id.invalid = Class of service must be valid or empty.
trunks.codecs = Codecs
trunks.codecs.tooltip = List of allowed codecs. The order in which the codecs are listed determines their order of preference. If you select at least one codec, the "disallow=all" parameter will be also generated.
trunks.custom_settings = Custom Settings
trunks.dahdi_trunk_parameters = DAHDi Trunk Parameters
trunks.default = Default
trunks.default.tooltip = DID is taken from the SIP R-URI
trunks.description = Description
trunks.description.tooltip = Short Description to identify this trunk
trunks.description.invalid = Description is required and must be unique.
trunks.parameters = Trunk Parameters
trunks.parameters.tooltip = Trunk Parameters
trunks.device_for_incoming_calls = Device for Incoming Calls (User)
trunks.device_for_outgoing_calls = Device for Outgoing Calls (Peer)
trunks.dialoptions = Dial Options
trunks.dialoptions.tooltip = Dial Options Parameters
trunks.dialstring = Dialstring
trunks.did_header = DID Source
trunks.did_header.tooltip = DID Source
trunks.did_header.invalid = DID source must be one of: "default", "to".
trunks.disable = Disable Trunk
trunks.disable.tooltip = This allows you to disable this trunk to be inaccessible.
trunks.diversion_sipheader = Diversion Header
trunks.diversion_sipheader.tooltip = If this value is set to Yes, then calls going to your outbound routes that originated outside your PBX and are forwarded through call forwarding, ring group, follow-me or other means, will have a SIP diversion header added to the call with the original incoming DID, assuming there is a DID available. This is useful with carriers that require this under certain circumstances.
trunks.empty = Only if Empty
trunks.empty.tooltip = Use the Trunk CID only when no CID is defined for the calling Extension or the Outbound Route.
trunks.general = General
trunks.group_id = Channel Group
trunks.group_id.invalid = Channel Group is required
trunks.group_id.tooltip = The channel group used by this trunk
trunks.group_mode = Mode
trunks.group_mode.tooltip = Selection mode for available channels.
trunks.group_mode.invalid = Mode must be one of: "g", "G", "r", "R".
trunks.h323_disabled_note = H323 is disabled. To make the H323 trunk functional enable the H323 option in {0}
trunks.incoming_defaultuser = Remote Username
trunks.incoming_defaultuser.tooltip = Authentication username for remote server
trunks.incoming_host = Host
trunks.incoming_host.tooltip = Address of calling SIP server
trunks.incoming_qualify = Qualify
trunks.incoming_qualify.tooltip = Makes sure that is alive
trunks.incoming_remotesecret = Remote Secret
trunks.incoming_remotesecret.tooltip = Authentication secret for remote server
trunks.incoming_secret = Local Secret
trunks.incoming_secret.tooltip = Secret to be used for authentication requests from remote server.
trunks.incoming_trunk = IAX Trunking
trunks.incoming_trunk.tooltip = Allows sending voice of several calls in one IAX packet. It can significantly reduce the required network bandwidth.
trunks.incoming_type = IP Authentication
trunks.incoming_type.tooltip = If checked, allows the incoming requests authentication by IP address in addition to the username authentication.
trunks.incoming_username = Username
trunks.incoming_username.duplicate = Incoming Username already exist (must be unique)
trunks.incoming_username.exists = Device with the same username <b>({0})</b> as Incoming Username already exists. (must be unique) {1}
trunks.incoming_username.tooltip = Username the remote server should use to contact this PBX. It is also the device name that will be created.
trunks.incoming_username.invalid = Incoming Username must be alphanumeric without spaces, optionally containing +, -, # and *.
trunks.insecure = Insecure
trunks.insecure.invite = Invite
trunks.insecure.invite.tooltip = Do not require authentication of incoming INVITES'
trunks.insecure.not_used = Not used
trunks.insecure.port = Port
trunks.insecure.port.tooltip = Allow matching of peer by IP address without matching port number
trunks.insecure.port_invite = Port, Invite
trunks.insecure.port_invite.tooltip = The combination is the minimum security since no checking or port check or authentication to the INVITE message type.
trunks.insecure.tooltip = Allows relaxing authentication of incoming SIP requests.
trunks.ip = IP
trunks.ip.duplicate = IP is required
trunks.ip.tooltip = IP address
trunks.mtsrc = External IP
trunks.mtsrc.tooltip = Some SIP trunk providers authenticate the endpoints by IP address. It means that the SIP traffic for this specific trunk must go out from particular external MT Server IP address that you can define here. This address must be agreed with MT Server administrator. <br/>Usage Example: ip[:port]
trunks.outbound_proxy = Outbound Proxy
trunks.outbound_proxy.tooltip = Outbound proxy domain name or IP address that may be required by the SIP trunk provider. <br/>Example: [transport://]ip address or domain name[:port]
trunks.multi_tenant = Multi Tenant
trunks.music_group_id = Music on Hold
trunks.music_group_id.tooltip = This option specifies which music on hold class to suggest to the peer channel when this channel places the peer on hold.
trunks.music_group_id.invalid = Music on hold must be valid or empty.
trunks.name = Name
trunks.name.duplicate = Name is required and must be unique
trunks.name.tooltip = Trunk Name
trunks.never = Never
trunks.never.tooltip = Use the CID that is defined for the calling Extension or the Outbound Route. CID will be empty when no CID is defined for either the Extension or the Outbound Route.
trunks.note = Note:
trunks.number = Number
trunks.outgoing_defaultuser = Remote Username
trunks.outgoing_defaultuser.tooltip = Authentication username for remote server
trunks.outgoing_fromdomain = From Domain
trunks.outgoing_fromdomain.tooltip = Replaces the domain part in the "From" header field. Sometimes required for proper authentication on remote server. Otherwise, the local IP address is used.
trunks.outgoing_fromdomain.required = From domain is required when using remote outbound proxy and/or external IP.
trunks.outgoing_fromuser = From User
trunks.outgoing_fromuser.tooltip = Replaces the SIP user name in the "From" header field. Sometimes required for proper authentication on remote server.
trunks.outgoing_host = Host
trunks.outgoing_host.duplicate = Outgoing Host is required
trunks.outgoing_host.tooltip = Remote server address
trunks.outgoing_port = Port
trunks.outgoing_port.tooltip = The port number we want to connect to on the remote side
trunks.outgoing_port.invalid = Port number must between a number ranging from 1 until 65535.
trunks.outgoing_qualify = Qualify
trunks.outgoing_qualify.tooltip = Makes sure that is alive
trunks.outgoing_remotesecret = Remote Secret
trunks.outgoing_remotesecret.tooltip = Authentication secret for remote server
trunks.outgoing_secret = Local Secret
trunks.outgoing_secret.tooltip = Secret to be used for authentication requests from remote server.
trunks.outgoing_trunk = IAX Trunking
trunks.outgoing_trunk.tooltip = Allows sending voice of several calls in one IAX packet. It can significantly reduce the required network bandwidth.
trunks.outgoing_type = Allow Inbound Calls
trunks.outgoing_type.tooltip = If checked,  this device will be allowed also to accept calls.
trunks.outgoing_username = Outgoing Username
trunks.outgoing_username.duplicate = Outgoing Username already exist (must be unique)
trunks.outgoing_username.exists = Device with the same username <b>({0})</b> as Outgoing Username already exists. (must be unique) {1}
trunks.outgoing_username.tooltip = Username the remote server should use to contact this PBX. It is also the device name that will be created.
trunks.outgoing_username.invalid = Outgoing Username must be alphanumeric without spaces, optionally containing +, -, # and *.
trunks.overwrite_cid = Overwrite CID
trunks.overwrite_cid.tooltip = Overwrite Caller ID
trunks.overwrite_cid.invalid = Overwrite CID must be one of: "yes", "no", "empty".
trunks.register_flag = Use Default
trunks.register_flag.tooltip = Use default Register String
trunks.register_string = Register String
trunks.restricted = Trunk Default
trunks.ringtimer = Ring Time
trunks.ringtimer.tooltip = Time to ring the trunk
trunks.ringtimer.invalid = Ring time is required and must be a number greater than or equal to zero.
trunks.source_ip_address.invalid = Source IP Address {0} is invalid
trunks.source_ip_address = IP Address
trunks.srouce_ip_addresses = IP Addresses
trunks.source_ip_address.table_tooltip = Addresses to be checked as the last resort to associate a guest call to this trunk. Ref. the manual for the further details
trunks.source_ip = Source IP
trunks.source_ip_list = Source IP List
trunks.source_ip_setup.warning = Note: Setting one or more source IP addresses will change the behavior of the <b>Allow Guest</b> setting that is defined in the <b>{0}</b> dialog. <br/>Refer to the documentation of {1} in the User Manual for a detailed explanation of Source IP Addresses.
trunks.technology = Technology
trunks.technology.invalid = Technology is required and must be valid.
trunks.technology.h323 = H.323
trunks.technology.iax2 = IAX2
trunks.technology.sip = SIP
trunks.technology.telephony = Telephony
trunks.technology.tooltip = Trunk Technology
trunks.to_field = 'To'
trunks.to_field.tooltip = DID is taken from the SIP 'To' header field. This is useful with carriers that send the DID in this field.
trunks.trkcustom.enabled = Enabled
trunks.trkcustom.param = Parameter
trunks.trkcustom.type = Type
trunks.trkcustom.type.friend = Friend
trunks.trkcustom.type.peer = Peer
trunks.trkcustom.type.user = User
trunks.trkcustom.value = Value
trunks.trunk_cid = Trunk CID
trunks.trunk_cid_number.invalid = Trunk CID is invalid. Only *,#,+ and numbers are allowed.
trunks.trunk_cid.tooltip = Caller ID for this trunk.
trunks.trunk_cid_name = Trunk CID Name
trunks.trunk_cid_number = Trunk CID Number
trunks.trunk_cid.invalid = Trunk CID must be valid or empty.
trunks.use = Use
trunks.use.tooltip = Use channel group or a channel
trunks.use_incoming_cid = Use Incoming CID
trunks.use_incoming_cid.tooltip = When Overwrite CID is set to <b>Never</b>, enabling this will force the outgoing call to be made with the same CID as received from external incoming calls.
trunks.use.invalid = Type must be one of: "groups", "channels".
trunks.username.duplicate = Outgoing Username (peer) cannot be the same as Incoming Username (user)
trunks.cos.warning = The action you are about to perform may create security vulnerabilities. <b>Do not proceed unless you are sure you understand the logic of Class of Service for trunks.</b>
trunks.cos.warning.title = Warning
trunks.cos.warning.confirm = I understand and confirm
trunks.cos.warning.cancel = Cancel my change
trunks.dial_profile_id = Dial Profile
trunks.dial_profile_id.invalid = Dial profile must be valid or empty.
trunks.dial_profile_id.tooltip = Profile with the dial options to use when this trunk is dialed.
destination_type.trunk = Trunk
trunks.profile_id.invalid = Profile is required and must be valid.
trunks.profile_id = Profile
trunks.profile_id.tooltip = Profile used for this trunk.
trunks.autoframing = Auto Framing
trunks.autoframing.tooltip = Set packetization based on the remote endpoint's (ptime) preferences.
trunk_parameter.trunk_id.invalid = Trunk is required and must be valid.
sip_trunk_parameter.type.invalid = Type is required and must be valid.
sip_trunk_parameter.param.invalid = Param is required.
iax_trunk_parameter.type.invalid = Type is required and must be valid.
iax_trunk_parameter.param.invalid = Param is required.
h323_trunk_parameter.param.invalid = Param is required.
telephony_trunk_parameter.param.invalid = Param is required.
trunks.relations=Relations
trunks.sources = Sources
trunks.no_source_relations = No sources for this Trunk.
trunks.trunk = Trunk
trunks.destinations = Destinations
trunks.relations_select_trunks = Select a Trunk to see its relations
trunks.sip_headers = SIP Headers
trunks.sip_headers.tooltip = Add custom SIP Headers to outgoing calls from this trunk.
trunks.sip_headers.header = Header
trunks.sip_headers.content = Content
trunks.sip_headers.enabled = Enabled
