menu.system_general = System General
module.system_general = System General
system_general.ami_settings = AMI Settings
system_general.ast_agi_dir = Asterisk AGI Directory
system_general.ast_dir = Asterisk Directory
system_general.ast_libs_dir = Asterisk Libraries Directory
system_general.ast_log_dir = Asterisk Log Directory
system_general.ast_module_dir = Asterisk Modules Directory
system_general.ast_sound_dir = Asterisk Sound Directory
system_general.ast_spool_dir = Asterisk Spool Directory
system_general.auto_portal = Enable Portal
system_general.auto_portal.tooltip = If enabled, the portal will be enabled automatically each time you create an extension.
system_general.auto_voicemail = Enable Voicemail
system_general.auto_voicemail.tooltip = If enabled, the voicemail will be enabled automatically each time you create an extension.
system_general.ami_external_conn = Allow External Connections
system_general.bindaddr.tooltip = Allow AMI external connections. If set to 'Yes', the AMI listening address is set to 0.0.0.0, i.e. listen on all address, provided that the firewall is open. Default 'No', listens only to 127.0.0.1.
system_general.dialoptions = Extensions Dial Options
system_general.dialoptions.tooltip = Default options to use for dial internal extensions when dial options are not defined(on extensions module).
system_general.dialplan = Dialplan
system_general.dialplan_settings = Dial-Plan Settings
system_general.extension_settings = Extension Settings
system_general.extensions = Extensions
system_general.general = General
system_general.none = None
system_general.portal_email_password = Email Portal Password
system_general.portal_email_password.tooltip = Automatically send portal user and password to extension email address when extension is created.
system_general.ringtime = Default Ring Time
system_general.ringtime.placeholder = Value in seconds
system_general.ringtime.tooltip = Default time to ring a destination (except a trunk) before the call times out and carries forward to the next destination.
system_general.rtp_fw_note = Make sure these ports are open in the ADMIN/Security/Firewall/Services dialog
system_general.rtp_settings = RTP Settings
system_general.rtpstart = RTP Start Port
system_general.rtpstart.tooltip = RTP Start Port. Leave empty for 10000 (default)
system_general.rtpend = RTP End Port
system_general.rtpend.tooltip = RTP End Port. Leave empty for 20000 (default)
system_general.save = Save
system_general.limit_extensions_cos = Limit Extension CoS
system_general.limit_extensions_cos.tooltip = A global CoS that users can activate by dialing the Limit Extension Feature Code. This could be used, for example, when a user is out of the office to restrict the features available on his extension.
system_general.hairpinning = Hairpinning
system_general.hairpinning.tooltip = When a call is made to an external number, it is normally routed via an outbound route to a trunk. However, if a call is made to an external number that is defined as an inbound route in CompletePBX and hairpinning is enabled, the call will be directed to the destination defined for the inbound route, and will not be routed to a trunk.
system_general.reject_anonymous_calls = Reject Anonymous Calls
system_general.reject_anonymous_calls.tooltip = Calls with no Caller ID (empty) or Caller ID identified as "asterisk", "anonymous", "unknown", "private", or "restricted" will be rejected.
system_general.system_directories = System Directories
system_general.table.description = Description
system_general.table.path = Path
system_general.trunk_dialoptions = Trunk Dial Options
system_general.trunk_dialoptions.tooltip = Default options to use for dial external numbers when trunk dial options are not defined(on trunks module).
system_general.trunk_ringtime = Default Trunk Ring Time
system_general.trunk_ringtime.placeholder = Value in seconds
system_general.trunk_ringtime.tooltip = Default time to ring a trunk
system_general.language = Language
system_general.language.tooltip = Default language used by voice prompts. This can be customized per-extension, per-inbound route and in various applications.
system_general.decline_unroutable = Decline Unroutable Incoming Calls
system_general.decline_unroutable.tooltip = When enabled, incoming calls that cannot be routed to any destination will be declined immediately. When disabled, the caller is provided with an audible message noting that the call is unroutable.
system_general.wakeup_call_settings = Wakeup-call Settings
system_general.wkup_maxretries = Max Attempts
system_general.wkup_maxretries.tooltip = Maximum number of wakeup call attempts that will be made.
system_general.wkup_retrytime = Retry Interval
system_general.wkup_retrytime.tooltip = Number of minutes between wakeup call attempts.
system_general.hot_desking = Hot Desking
system_general.autologin_queue = Auto Login to Queues
system_general.autologin_queue.tooltip = If enabled, Hotdesking log in, will also login the agent to all of his/her dynamic queues
system_general.require_reset_pass = Require Change User Password
system_general.require_reset_pass.tooltip = If enabled, New users will be required to change password after first login
system_general.transferrer = Transferrer Setting
system_general.transfer_callback = Return callback
system_general.transfer_callback.tooltip = Return callback behavior when the transfer destination is not answering ( valid only on blind transfers to an extension )
system_general.return_NA = Return to transferrer if no answer
system_general.return_NA_VM = Return to transferrer if no answer or voicemail
system_general.no_return = Do not return to transferrer
system_general.return_callback_prefix = Return Callback Prefix
system_general.return_callback_prefix.tooltip = Prefix to prepend to CID Name. Can be used to indicate to the transferrer that call came back from an unanswered transfer call.
system_general.return_callback_prefix.invalid = Return Callback Prefix is invalid. Only underscore, dash and alphanumeric values are allowed
system_general.queues = Queues
system_general.queues_settings = Queues Settings
system_general.shared_wrapup_time = Wrap-up Time
system_general.shared_wrapup_time.tooltip = Defines how wrap-up time is applied: By Agent: Shared across all queues for each agent. By Queue: Separate wrap-up timers per queue.
system_general.shared_wrapup_time.agent = Agent
system_general.shared_wrapup_time.queue = Queue
system_general.log_unanswered_calls_to_cdr = Log Unroutable Calls To CDR
system_general.log_unanswered_calls_to_cdr.tooltip = Enable CDR loging of calls that were not answered and ended as HangUp.
system_general.company_name = Company Name
system_general.company_name.tooltip = Enter the name of the company
system_general.organization = Company
system_general.departments = Departments
system_general.departments.tooltip = Enter departments (used by Virtual Agents).
system_general.department.name = Name
system_general.department.description = Description
system_general.sip_devices = SIP Devices
system_general.sip_device_defaults = Set SIP Device Defaults
