menu.profiles = Profiles
module.profiles = Profiles
profiles = Profiles
profiles_advanced = Advanced
profiles_advanced_add = Add
profiles_advanced_parameter = Parameter
profiles_advanced_value = Value
profiles_confirm_delete = Are you sure you wish to delete this profile?
profiles_default_delete = Default profiles cannot be deleted.
profiles_delete = Delete
profiles_description = Description
profiles_description_tooltip = Description for this profile.
profiles_general = General
profiles_general_section = General
profiles_iax_description = Description
profiles_iax_description_tooltip = Description for this profile.
profiles_iax_general_section = General
profiles_iax_host = Host
profiles_iax_host_invalid = No host specified.
profiles_iax_host_tooltip = Hostname or address of device.
profiles_iax_name = Name
profiles_iax_name_duplicate = Duplicate profile name.
profiles_iax_name_invalid = Profile name is required and must be unique.
profiles_iax_name_tooltip = Name for this profile.
profiles_iax_network_section = Network
profiles_iax_peertype = Type
profiles_iax_peertype_friend = Friend
profiles_iax_peertype_invalid = Invalid value for Network Type
profiles_iax_peertype_peer = Peer
profiles_iax_peertype_tooltip = Defines the device type. "User" is a device that places calls, requires authentication. "Peer" is a trunk device, matched by host. "Friend" is a combination of the "User" and "Peer".
profiles_iax_peertype_user = User
profiles_iax_qualifyfreq = Qualify Frequency
profiles_iax_qualifyfreq_invalid = Qualify frequency must be a number starting from 0.
profiles_iax_qualifyfreq_tooltip = Define the qualify interval in seconds. A value of zero will disable this feature.
profiles_iax_qualify = Qualify Timeout
profiles_iax_qualify_invalid = Qualify must be a number starting from 0.
profiles_iax_qualify_tooltip = Define the maximum response time in milliseconds before a device is considered unreachable. A value of zero will disable this feature.
profiles_iax_requirecalltoken = Call Token
profiles_iax_requirecalltoken_auto = Automatic
profiles_iax_requirecalltoken_invalid = Call Token must be one of: Yes, No, Automatic.
profiles_iax_requirecalltoken_no = No
profiles_iax_requirecalltoken_tooltip = Use a requirecalltoken for authentication.
profiles_iax_requirecalltoken_yes = Yes
profiles_iax_transfer = Transfer
profiles_iax_transfer_invalid = Transfer must be one of: Yes, No, Media Only.
profiles_iax_transfer_media = Media Only
profiles_iax_transfer_no = No
profiles_iax_transfer_tooltip = Allow transfers from this device.
profiles_iax_transfer_yes = Yes
profiles_iax_transfer_ =
profiles_name = Name
profiles_name_duplicate = Duplicate profile name.
profiles_name_invalid = Profile name is required and must be unique.
profiles_name_tooltip = Name for this profile.
profiles_profile_deleted = The profile has been successfully deleted.
profiles_sip_avpf = AVPF
profiles_sip_avpf_tooltip = Enables inter-operatibility with media streams using the AVPF RTP profile.
profiles_sip_callerid = Caller ID
profiles_sip_callerid_section = Caller ID
profiles_sip_description = Description
profiles_sip_description_tooltip = Description for this profile.
profiles_sip_directmedia = Direct RTP
profiles_sip_directmedia_invalid = Direct RTP must be one of: Yes, No, Yes if no nat, Use UPDATE.
profiles_sip_directmedia_nonat = Yes, if no nat
profiles_sip_directmedia_no = No
profiles_sip_directmedia_tooltip = Enables direct sending of RTP between call participants.
profiles_sip_directmedia_update = Use UPDATE
profiles_sip_directmedia_yes = Yes
profiles_sip_encryption = RTP Encryption
profiles_sip_encryption_tooltip = Enables sRTP voice encryption.
profiles_sip_general_section = General
profiles_sip_host = Host
profiles_sip_host_invalid = No host specified.
profiles_sip_host_tooltip = Hostname or address of device.
profiles_sip_icesupport = ICE
profiles_sip_icesupport_tooltip = Use ICE protocol for bridging firewalls.
profiles_sip_name = Name
profiles_sip_name_duplicate = Duplicate profile name.
profiles_sip_name_invalid = Profile name is required and must be unique.
profiles_sip_name_tooltip = Name for this profile.
profiles_sip_network_section = Network
profiles_sip_peertype = Type
profiles_sip_peertype_friend = Friend
profiles_sip_peertype_invalid = Invalid value for Network Type
profiles_sip_peertype_peer = Peer
profiles_sip_peertype_tooltip = Defines the device type. "User" is a device that places calls, requires authentication. "Peer" is a trunk device, matched by host. "Friend" is a combination of the "User" and "Peer".
profiles_sip_peertype_user = User
profiles_sip_qualifyfreq = Qualify Frequency
profiles_sip_qualifyfreq_invalid = Qualify frequency must be a number starting from 0.
profiles_sip_qualifyfreq_tooltip = Define the qualify interval in seconds. A value of zero will disable this feature.
profiles_sip_qualify = Qualify Timeout
profiles_sip_qualify_invalid = Qualify must be a number starting from 0.
profiles_sip_qualify_tooltip = Define the maximum response time in milliseconds before a device is considered unreachable. A value of zero will disable this feature.
profiles_sip_sendrpid = Send Remote Party ID
profiles_sip_sendrpid_invalid = Send Remote Party ID must be one of: Yes, No, Use RPID, Use PAI.
profiles_sip_sendrpid_no = No
profiles_sip_sendrpid_pai = Use PAI (Privacy Asserted Identity)
profiles_sip_sendrpid_rpid = Use RPID (Remote Party ID)
profiles_sip_sendrpid_tooltip = Add remote party ID header to SIP INVITEs.
profiles_sip_sendrpid_yes = Yes
profiles_sip_transport = Transport
profiles_sip_transport_invalid = Transport must be one of: TCP, UDP, TLS, WS and/or WSS.
profiles_sip_transport_tcp = TCP
profiles_sip_transport_tls = TLS
profiles_sip_transport_tooltip = Communication method to use for this device.
profiles_sip_transport_udp = UDP
profiles_sip_transport_wss = WSS
profiles_sip_transport_ws = WS
profiles_sip_trustrpid = Trust Remote Party ID
profiles_sip_trustrpid_tooltip = Assume that the remote party ID header is correct.
profiles_sip_videosupport = Video Support
profiles_sip_videosupport_tooltip = Controls support for SIP video.
profiles_sip_videosupport_always = Always
profiles_sip_videosupport_yes = Automatic
profiles_sip_videosupport_no = Disabled
profiles_sip_videosupport_invalid = Video support is required and must be one of 'always', 'yes' or 'no'.
profiles_sip_maxcallbitrate = Max Call BitRate
profiles_sip_maxcallbitrate_tooltip = Maximum bitrate for video calls (default 384 kb/s).
profiles_sip_maxcallbitrate_invalid = Maximum video call bitrate is required and must be greater than zero.
profiles_sip_codecs = Codecs
profiles_sip_codecs_tooltip = List of allowed codecs. The order in which the codecs are listed determines their order of preference. If you select at least one codec, the "disallow=all" parameter will be also generated.
profiles_sip_codecs_alaw = alaw
profiles_sip_codecs_g729 = g729
profiles_sip_codecs_g722 = g722
profiles_sip_codecs_gsm = gsm
profiles_sip_codecs_h263 = h263
profiles_sip_codecs_h264 = h264
profiles_sip_codecs_ilbc = ilbc
profiles_sip_codecs_opus = opus
profiles_sip_codecs_ulaw = ulaw
profiles_sip_codecs_vp8 = vp8
profiles_sip_codecs_g726aal2 = g726aal2
profiles_sip_codecs_adpcm = adpcm
profiles_sip_codecs_lpc10 = lpc10
profiles_sip_codecs_slin = slin
profiles_sip_codecs_h263p = h263p
profiles_sip_codecs_h261 = h261
profiles_sip_codecs_g723 = g723
profiles_sip_codecs_g726 = g726
profiles_sip_codecs_speex = speex
profiles_sip_preferred_codec_only = Preferred Codec Only
profiles_sip_preferred_codec_only_tooltip = Respond to a SIP invite with the single most preferred codec rather than advertising all joint codec capabilities. This limits the other side's codec choice to exactly what we prefer.
profiles_sip_autoframing = Auto Framing
profiles_sip_autoframing_tooltip = Set packetization based on the remote endpoint's (ptime) preferences.
profiles_sip_dtmfmode = DTMF Mode
profiles_sip_dtmfmode_tooltip = Set default DTMF mode. Recommended to use RFC 2833.
profiles_sip_dtmfmode_rfc2833 = RFC 2833
profiles_sip_dtmfmode_info = SIP INFO messages (application/dtmf-relay)
profiles_sip_dtmfmode_shortinfo = SIP INFO messages (application/dtmf)
profiles_sip_dtmfmode_inband = Inband audio
profiles_sip_dtmfmode_auto = Automatic
profiles_technology = Profile Type
profiles_technology_duplicate_name = Profile name must be unique.
profiles_technology_iax = IAX2
profiles_technology_invalid = Invalid technology type selected.
profiles_technology_sip = SIP
profiles_technology_tooltip = Technology type for this profile.
profiles_technology_cloudphone = CloudPhone
profiles_cloudphone_avpf = AVPF
profiles_cloudphone_avpf_tooltip = Enables inter-operatibility with media streams using the AVPF RTP profile.
profiles_cloudphone_callerid = Caller ID
profiles_cloudphone_callerid_section = Caller ID
profiles_cloudphone_codecs = Codecs
profiles_cloudphone_codecs_tooltip = List of allowed codecs. The order in which the codecs are listed determines their order of preference. If you select at least one codec, the "disallow=all" parameter will be also generated.
profiles_cloudphone_codecs_alaw = alaw
profiles_cloudphone_codecs_g729 = g729
profiles_cloudphone_codecs_g722 = g722
profiles_cloudphone_codecs_gsm = gsm
profiles_cloudphone_codecs_h263 = h263
profiles_cloudphone_codecs_h264 = h264
profiles_cloudphone_codecs_ilbc = ilbc
profiles_cloudphone_codecs_opus = opus
profiles_cloudphone_codecs_ulaw = ulaw
profiles_cloudphone_codecs_vp8 = vp8
profiles_cloudphone_preferred_codec_only = Preferred Codec Only
profiles_cloudphone_preferred_codec_only_tooltip = Respond to a SIP invite with the single most preferred codec rather than advertising all joint codec capabilities. This limits the other side's codec choice to exactly what we prefer.
profiles_cloudphone_autoframing = Auto Framing
profiles_cloudphone_autoframing_tooltip = Set packetization based on the remote endpoint's (ptime) preferences.
profiles_cloudphone_deny = Deny
profiles_cloudphone_deny_invalid = Deny is invalid. Values can be written as address/subnet (eg. 192.168.1.1/255.255.255.0) or using CIDR notation (eg. 192.168.1.1/24), separated by comma or space.
profiles_cloudphone_deny_tooltip = One or more networks and/or addresses to block. The default of 0.0.0.0/0 means to block everything. Values can be written as address/subnet (eg. 192.168.1.1/255.255.255.0) or using CIDR notation (eg. 192.168.1.1/24), separated by comma or space.
profiles_cloudphone_description = Description
profiles_cloudphone_description_tooltip = Description for this profile.
profiles_cloudphone_directmedia = Direct RTP
profiles_cloudphone_directmedia_invalid = Direct RTP must be one of: Yes, No, Yes if no nat, Use UPDATE.
profiles_cloudphone_directmedia_nonat = Yes, if no nat
profiles_cloudphone_directmedia_no = No
profiles_cloudphone_directmedia_tooltip = Enables direct sending of RTP between call participants.
profiles_cloudphone_directmedia_update = Use UPDATE
profiles_cloudphone_directmedia_yes = Yes
profiles_cloudphone_dtmfmode = DTMF Mode
profiles_cloudphone_dtmfmode_info = info
profiles_cloudphone_dtmfmode_info_tooltip = SIP INFO messages (application/dtmf-relay)
profiles_cloudphone_dtmfmode_rfc2833 = rfc2833
profiles_cloudphone_dtmfmode_tooltip = Set default dtmf-mode for sending DTMF. Default rfc2833
profiles_cloudphone_encryption = RTP Encryption
profiles_cloudphone_encryption_tooltip = Enables sRTP voice encryption.
profiles_cloudphone_general_section = General
profiles_cloudphone_host = Host
profiles_cloudphone_host_invalid = No host specified.
profiles_cloudphone_host_tooltip = Hostname or address of device.
profiles_cloudphone_icesupport = ICE
profiles_cloudphone_icesupport_tooltip = Use ICE protocol for bridging firewalls.
profiles_cloudphone_name = Name
profiles_cloudphone_name_duplicate = Duplicate profile name.
profiles_cloudphone_name_invalid = Profile name is required and must be unique.
profiles_cloudphone_name_tooltip = Name for this profile.
profiles_cloudphone_nat = NAT
profiles_cloudphone_nat_tooltip = NAT (Network Address Translation) is a technology most commonly used by firewalls and routers to allow multiple devices on a LAN with "private" IP addresses to share a single public IP address. A private IP address is an address, which can only be addressed from within the LAN, but not from the Internet outside the LAN.
profiles_cloudphone_nat_auto_comedia = Auto Comedia
profiles_cloudphone_nat_auto_comedia_tooltip = Set the comedia option if Asterisk detects NAT.
profiles_cloudphone_nat_auto_force_rport = Auto Force
profiles_cloudphone_nat_auto_force_rport_tooltip = Set the force_rport option if Asterisk detects NAT.
profiles_cloudphone_nat_auto_force_tooltip = Set the force_rport option if Asterisk detects NAT.
profiles_cloudphone_nat_force_rport,comedia = Force, Comedia
profiles_cloudphone_nat_comedia = Comedia
profiles_cloudphone_nat_comedia_tooltip = Send media to the port Asterisk received it from regardless of where the SDP says to send it.
profiles_cloudphone_nat_force = Force
profiles_cloudphone_nat_force_tooltip = Pretend there was an rport parameter even if there wasn't.
profiles_cloudphone_nat_force_rport = Force
profiles_cloudphone_nat_no = No
profiles_cloudphone_nat_no_tooltip = Do no special NAT handling other than RFC3581.
profiles_cloudphone_nat_no_mt_tooltip = Do no special NAT handling other than RFC3581. <b>(The only option allowed for MT System)</b>
profiles_cloudphone_network_section = Network
profiles_cloudphone_peertype = Type
profiles_cloudphone_peertype_friend = Friend
profiles_cloudphone_peertype_invalid = Invalid value for Network Type
profiles_cloudphone_peertype_peer = Peer
profiles_cloudphone_peertype_tooltip = Defines the device type. "User" is a device that places calls, requires authentication. "Peer" is a trunk device, matched by host. "Friend" is a combination of the "User" and "Peer".
profiles_cloudphone_peertype_user = User
profiles_cloudphone_permit = Permit
profiles_cloudphone_permit_invalid = Permit is invalid. Values can be written as address/subnet (eg. 192.168.1.1/255.255.255.0) or using CIDR notation (eg. 192.168.1.1/24), separated by comma or space.
profiles_cloudphone_permit_tooltip = One or more networks and/or addresses to whitelist. The default of 0.0.0.0/0 means to whitelist everything. Values can be written as address/subnet (eg. 192.168.1.1/255.255.255.0) or using CIDR notation (eg. 192.168.1.1/24), separated by comma or space.
profiles_cloudphone_qualifyfreq = Qualify Frequency
profiles_cloudphone_qualifyfreq_invalid = Qualify frequency must be a number starting from 0.
profiles_cloudphone_qualifyfreq_tooltip = Define the qualify interval in seconds. A value of zero will disable this feature.
profiles_cloudphone_qualify = Qualify Timeout
profiles_cloudphone_qualify_invalid = Qualify must be a number starting from 0.
profiles_cloudphone_qualify_tooltip = Define the maximum response time in milliseconds before a device is considered unreachable. A value of zero will disable this feature.
profiles_cloudphone_sendrpid = Send Remote Party ID
profiles_cloudphone_sendrpid_invalid = Send Remote Party ID must be one of: Yes, No, Use RPID, Use PAI.
profiles_cloudphone_sendrpid_no = No
profiles_cloudphone_sendrpid_pai = Use PAI (Privacy Asserted Identity)
profiles_cloudphone_sendrpid_rpid = Use RPID (Remote Party ID)
profiles_cloudphone_sendrpid_tooltip = Add remote party ID header to SIP INVITEs.
profiles_cloudphone_sendrpid_yes = Yes
profiles_cloudphone_transport = Transport
profiles_cloudphone_transport_invalid = Transport must be one of: TCP, UDP, TLS, WS and/or WSS.
profiles_cloudphone_transport_tcp = TCP
profiles_cloudphone_transport_tls = TLS
profiles_cloudphone_transport_tooltip = Communication method to use for this device.
profiles_cloudphone_transport_udp = UDP
profiles_cloudphone_trustrpid = Trust Remote Party ID
profiles_cloudphone_trustrpid_tooltip = Assume that the remote party ID header is correct.
profiles_cloudphone_videosupport = Video Support
profiles_cloudphone_videosupport_tooltip = Controls support for SIP video.
profiles_cloudphone_videosupport_always = Always
profiles_cloudphone_videosupport_yes = Automatic
profiles_cloudphone_videosupport_no = Disabled
profiles_cloudphone_videosupport_invalid = Video support is required and must be one of 'always', 'yes' or 'no'.
profiles_cloudphone_maxcallbitrate = Max Call BitRate
profiles_cloudphone_maxcallbitrate_tooltip = Maximum bitrate for video calls (default 384 kb/s).
profiles_cloudphone_maxcallbitrate_invalid = Maximum video call bitrate is required and must be greater than zero.
profiles_cloudphone_provisioning_section = Provisioning
profiles_cloudphone_external_hostname = External Hostname
profiles_cloudphone_external_hostname_tooltip = External hostname or IP address of this PBX, optionally including the port number.
profiles_cloudphone_external_hostname_invalid = Invalid value for External Hostname
profiles_cloudphone_remote_outbound_proxy = Outbound Proxy
profiles_cloudphone_remote_outbound_proxy_tooltip = Outbound proxy that the CloudPhone application should use, optionally including the port number.
profiles_cloudphone_autoanswer = Auto Answer
profiles_cloudphone_autoanswer_tooltip = When enabled, the device will automatically answer incoming calls.
profiles_cloudphone_autoanswer_timeout = Auto Answer Delay
profiles_cloudphone_autoanswer_timeout_tooltip = When Auto Answer is enabled, this value represents the number of seconds to wait before incoming calls are answered automatically.
profiles_cloudphone_autoanswer_timeout_invalid = Auto answer delay must be greater than or equal to zero.
profiles_cloudphone_app_title = Application Title
profiles_cloudphone_app_title_tooltip = Choose the application title presentation.
profiles_cloudphone_app_title_name_extension= Name - Extension
profiles_cloudphone_app_title_extension_name = Extension - Name
profiles_cloudphone_app_title_name = Name
profiles_cloudphone_app_title_extension = Extension
profiles_cloudphone_app_title_default = Default
profiles_cloudphone_hide_dnd = Hide DND
profiles_cloudphone_hide_dnd_tooltip = When enabled, the device will hide the DND button.
profiles.used_as_anonymous_profile = Profile cannot be deleted, it is used by <a onclick="pbx_request('menu43');">SIP Settings</a> for incoming anonymous calls.
profiles.used_as_anonymous_profile.nohtml = Profile cannot be deleted, it is used for incoming anonymous calls.
profiles_advanced_enabled = Enabled
profiles_technology_teams = Teams Connector
profiles_teams_avpf = AVPF
profiles_teams_avpf_tooltip = Enables inter-operatibility with media streams using the AVPF RTP profile.
profiles_teams_callerid = Caller ID
profiles_teams_callerid_section = Caller ID
profiles_teams_codecs = Codecs
profiles_teams_codecs_tooltip = List of allowed codecs. The order in which the codecs are listed determines their order of preference. If you select at least one codec, the "disallow=all" parameter will be also generated.
profiles_teams_codecs_alaw = alaw
profiles_teams_codecs_ulaw = ulaw
profiles_teams_codecs_g729 = g729
profiles_teams_codecs_g722 = g722
profiles_teams_preferred_codec_only = Preferred Codec Only
profiles_teams_preferred_codec_only_tooltip = Respond to a SIP invite with the single most preferred codec rather than advertising all joint codec capabilities. This limits the other side's codec choice to exactly what we prefer.
profiles_teams_autoframing = Auto Framing
profiles_teams_autoframing_tooltip = Set packetization based on the remote endpoint's (ptime) preferences.
profiles_teams_deny = Deny
profiles_teams_deny_invalid = Deny is invalid. Values can be written as address/subnet (eg. 192.168.1.1/255.255.255.0) or using CIDR notation (eg. 192.168.1.1/24), separated by comma or space.
profiles_teams_deny_tooltip = One or more networks and/or addresses to block. The default of 0.0.0.0/0 means to block everything. Values can be written as address/subnet (eg. 192.168.1.1/255.255.255.0) or using CIDR notation (eg. 192.168.1.1/24), separated by comma or space.
profiles_teams_description = Description
profiles_teams_description_tooltip = Description for this profile.
profiles_teams_directmedia = Direct RTP
profiles_teams_directmedia_invalid = Direct RTP must be one of: Yes, No, Yes if no nat, Use UPDATE.
profiles_teams_directmedia_nonat = Yes, if no nat
profiles_teams_directmedia_no = No
profiles_teams_directmedia_tooltip = Enables direct sending of RTP between call participants.
profiles_teams_directmedia_update = Use UPDATE
profiles_teams_directmedia_yes = Yes
profiles_teams_dtmfmode = DTMF Mode
profiles_teams_dtmfmode_info = info
profiles_teams_dtmfmode_info_tooltip = SIP INFO messages (application/dtmf-relay)
profiles_teams_dtmfmode_rfc2833 = rfc2833
profiles_teams_dtmfmode_tooltip = Set default dtmf-mode for sending DTMF. Default rfc2833
profiles_teams_general_section = General
profiles_teams_host = Host
profiles_teams_host_invalid = No host specified.
profiles_teams_host_tooltip = Hostname or address of device.
profiles_teams_icesupport = ICE
profiles_teams_icesupport_tooltip = Use ICE protocol for bridging firewalls.
profiles_teams_name = Name
profiles_teams_name_duplicate = Duplicate profile name.
profiles_teams_name_invalid = No profile name specified.
profiles_teams_name_tooltip = Name for this profile.
profiles_teams_nat = NAT
profiles_teams_nat_tooltip = NAT (Network Address Translation) is a technology most commonly used by firewalls and routers to allow multiple devices on a LAN with "private" IP addresses to share a single public IP address. A private IP address is an address, which can only be addressed from within the LAN, but not from the Internet outside the LAN.
profiles_teams_nat_auto_comedia = Auto Comedia
profiles_teams_nat_auto_comedia_tooltip = Set the comedia option if Asterisk detects NAT.
profiles_teams_nat_auto_force_rport = Auto Force
profiles_teams_nat_auto_force_rport_tooltip = Set the force_rport option if Asterisk detects NAT.
profiles_teams_nat_auto_force_tooltip = Set the force_rport option if Asterisk detects NAT.
profiles_teams_nat_force_rport,comedia = Force, Comedia
profiles_teams_nat_comedia = Comedia
profiles_teams_nat_comedia_tooltip = Send media to the port Asterisk received it from regardless of where the SDP says to send it.
profiles_teams_nat_force = Force
profiles_teams_nat_force_tooltip = Pretend there was an rport parameter even if there wasn't.
profiles_teams_nat_force_rport = Force
profiles_teams_nat_no = No
profiles_teams_nat_no_tooltip = Do no special NAT handling other than RFC3581.
profiles_teams_nat_no_mt_tooltip = Do no special NAT handling other than RFC3581. <b>(The only option allowed for MT System)</b>
profiles_teams_network_section = Network
profiles_teams_peertype = Type
profiles_teams_peertype_friend = Friend
profiles_teams_peertype_invalid = Invalid value for Network Type
profiles_teams_peertype_peer = Peer
profiles_teams_peertype_tooltip = Defines the device type. "User" is a device that places calls, requires authentication. "Peer" is a trunk device, matched by host. "Friend" is a combination of the "User" and "Peer".
profiles_teams_peertype_user = User
profiles_teams_permit = Permit
profiles_teams_permit_invalid = Permit is invalid. Values can be written as address/subnet (eg. 192.168.1.1/255.255.255.0) or using CIDR notation (eg. 192.168.1.1/24), separated by comma or space.
profiles_teams_permit_tooltip = One or more networks and/or addresses to whitelist. The default of 0.0.0.0/0 means to whitelist everything. Values can be written as address/subnet (eg. 192.168.1.1/255.255.255.0) or using CIDR notation (eg. 192.168.1.1/24), separated by comma or space.
profiles_teams_qualifyfreq = Qualify Frequency
profiles_teams_qualifyfreq_invalid = Qualify frequency must be a number starting from 0.
profiles_teams_qualifyfreq_tooltip = Define the qualify interval in seconds. A value of zero will disable this feature.
profiles_teams_qualify = Qualify Timeout
profiles_teams_qualify_invalid = Qualify must be a number starting from 0.
profiles_teams_qualify_tooltip = Define the maximum response time in milliseconds before a device is considered unreachable. A value of zero will disable this feature.
profiles_teams_transport = Transport
profiles_teams_transport_invalid = Transport must be one of: TCP, UDP, TLS, WS and/or WSS.
profiles_teams_transport_tcp = TCP
profiles_teams_transport_tls = TLS
profiles_teams_transport_tooltip = Communication method to use for this device.
profiles_teams_transport_udp = UDP
profiles_teams_videosupport = Video Support
profiles_teams_videosupport_tooltip = Controls support for SIP video.
profiles_teams_videosupport_always = Always
profiles_teams_videosupport_yes = Automatic
profiles_teams_videosupport_no = Disabled
profiles_teams_videosupport_invalid = Video support is required and must be one of 'always', 'yes' or 'no'.
profiles_teams_maxcallbitrate = Max Call BitRate
profiles_teams_maxcallbitrate_tooltip = Maximum bitrate for video calls (default 384 kb/s).
profiles_teams_maxcallbitrate_invalid = Maximum video call bitrate is required and must be greater than zero.
profiles_teams_provisioning_section = Provisioning
profiles_teams_external_hostname = External Hostname
profiles_teams_external_hostname_tooltip = External hostname or IP address of this PBX.
profiles_teams_external_hostname_invalid = No external hostname specified.
profiles_teams_external_hostname_port_included = You cannot set External Hostname port. In case if you want it then include it in Outbound Proxy.
profiles_teams_remote_outbound_proxy = Outbound Proxy
profiles_teams_remote_outbound_proxy_tooltip = Outbound proxy that the CloudPhone application should use, optionally including the port number.
profiles_teams_autoanswer = Auto Answer
profiles_teams_autoanswer_tooltip = When enabled, the device will automatically answer incoming calls.
profiles_teams_autoanswer_timeout = Auto Answer Delay
profiles_teams_autoanswer_timeout_tooltip = When Auto Answer is enabled, this value represents the number of seconds to wait before incoming calls are answered automatically.
profiles_teams_autoanswer_timeout_invalid = Auto answer delay must be greater than or equal to zero.
profiles_teams_country = Country
profiles_teams_country_tooltip = Country for this profile.
profiles_teams_country_invalid = No country specified.
profiles_teams_outside_line_prefix = Outside Line Prefix
profiles_teams_outside_line_prefix_tooltip = If your PBX requires dialing a digit for external calls/outside line, enter it here.
profiles_teams_account_id_missing = Teams Connector Account ID not set.
