menu.create_template = Templates
menu.device_mapping = Device Mapping
menu.endpoint_manager = Endpoint Manager
menu.host_settings = Host Settings
module.epm_device_mapping = Device Mapping
module.epm_host_settings = Host Settings
module.epm_template = Templates
module.endpoint = Endpoint Manager
epm.update = Update
epm.delete = Delete
epm.cancel = Cancel
epm.device_mapping.general_settings = General Settings
epm.device_mapping.warn_duplicate_devices = Duplicate devices are not allowed
epm.device_mapping.warn_invalid_mac = Invalid MAC address
epm.device_mapping.warn_duplicate_mac = Duplicate MAC addresses are not allowed
epm.device_mapping.warn_no_template = No template selected
epm.device_mapping.warn_no_tz = No Timezone selected
epm.device_mapping.default_host = Default templates will not work as long as Default host address is set to "example.com". <br>To make default templates functional please set the actual PBX IP address in {0}
epm.device_mapping.device_configure = Device Configure
epm.device_mapping.device_buttons = Device Buttons
epm.device_mapping.expansion_module = Expansion Modules
epm.device_mapping.device_search = Search Devices
epm.device_mapping.device_search.tooltip = Type the device number you want to find. This enables you to find a specific device, or group of devices, that exist in the list of mapped devices. You can enter a device number to see a specific device, or you can enter just the first few digits to see all the devices that start with those digits.
epm.device_mapping.advanced_settings = Advanced Settings
epm.device_mapping.warn_no_device = No physical device is associated with this Device in <a onclick="pbx_request('epm_device_mapping');">{module.endpoint}</a>
epm.device_mapping.cancel = Cancel
epm.device_mapping.check_uncheck_all = Check/Uncheck All
epm.device_mapping.update = Update
epm.device_mapping.mac_address = MAC Address
epm.device_mapping.note = Note!
epm.device_mapping.timezone = Timezone
epm.device_mapping.label = Label
epm.device_mapping.type = Type
epm.device_mapping.value = Value
epm.device_mapping.line = Line
epm.device_mapping.dss_buttons = DSS Buttons
epm.device_mapping.line_buttons = Line Buttons
epm.device_mapping.no_device_buttons = This device does not have buttons
epm.device_mapping.select_module_attach = Select module to attach
epm.device_mapping.add_module = Add Module
epm.device_mapping.attached_modules = Attached Modules
epm.device_mapping.no_device_expansions = This device does not support expansion modules
epm.device_mapping.settings_groups = Settings Groups
epm.device_mapping.assigned_devices = Assigned Devices
epm.device_mapping.table.mac_address = MAC Address
epm.device_mapping.table.ip_address = IP Address
epm.device_mapping.table.brand = Brand
epm.device_mapping.table.model = Model
epm.device_mapping.table.template = Template
epm.device_mapping.table.devices = Devices
epm.device_mapping.lines = Lines
epm.device_mapping.reboot_selected_devices = Reboot Selected Devices
epm.device_mapping.unassigned_devices = Unassigned Devices
epm.device_mapping.scan_subnet_devices = Scan Subnet for Devices
epm.device_mapping.scan_subnet_devices.tooltip = The devices that you want to manage can be automatically discovered. Type in a target network segment and mask, such as 192.168.0.0./24, and click on Scan Subnet for Devices. The discovery will take some time, depending on the number of addresses that can potentially exist on the subnet. Be careful not to use a mask that is too big, as this will impact the time required to complete the discovery process. If devices cannot be discovered by scanning the network, you can manually enter the MAC address of any phones that you want to manage. After completing a scan, you will need to define additional parameters for each phone: <br><ul><li>Brand from the drop-down list of known brands</li><li>Model from the drop-down list of models that are factory-defined</li><li>Template that this phone should use</li><li>Devices that should be linked to this phone. A phone can host one, or more, devices</li></ul>
epm.device_mapping.scan_subnet_devices.filter = Show Known Devices Only
epm.device_mapping.scan_subnet_devices.filter.tooltip = Checking this will filter out any devices that are not defined in the Endpoint Manager database as an endpoint device.
epm.device_mapping.add_device = Add a Device
epm.device_mapping.add_device.tooltip = Allows you to manually add endpoint devices that were not automatically discovered when scanning the subnet for devices. After manually adding a device, you will need to define additional parameters for each phone:<br><ul><li>MAC Address of the endpoint</li><li>Brand from the drop-down list of known brands</li><li>Model from the drop-down list of models that are factory-defined</li><li>Template that this phone should use</li><li>Devices that should be linked to this phone. A phone can host one, or more, devices</li></ul>
epm.device_mapping.view_cfg = View Configuration
epm.device_mapping.edit_cfg = Edit Configuration
epm.device_mapping.dekete_device = Delete Device
epm.device_mapping.search.no_extension = No device extension found
epm.device_mapping.search.title = Warning
epm.device_mapping.search.confirm = Confirm
epm.device_mapping.template.invalid = Invalid template_id
epm.device_mapping.timezone.invalid = Invalid timezone
epm.device_mapping.mac_address.invalid = Mac address can not be empty or duplicate
epm.host_settings.general = General
epm.host_settings.name = Name
epm.host_settings.name.tooltip = Identify each host with a unique name to simplify maintenance
epm.host_settings.hostname_ip_address = Hostname / IP Address
epm.host_settings.hostname_ip_address.tooltip = This is the address of your PBX server. Note that the IP address used by phones that reside on the same network as the PBX may be different from the address used by phones that are outside the local network. Phones that are on the same network can use the physical address of the PBX, even if it is a private IP address. Phones that are outside the network will need to use a publicly-accessible IP address or hostname.
epm.host_settings.sip_port = SIP Port
epm.host_settings.sip_port.tooltip = SIP port, typically 5060, is the port that phones will access when using SIP protocol. Phones that are on the same network as your PBX typically use the default port, while phones that are outside the local network may utilize port-forwarding to use a different port. There is no default value, so SIP phones will not work if this field is left blank.
epm.host_settings.iax_port = IAX2 Port
epm.host_settings.iax_port.tooltip = IAX2 Port, typically 4569, is the port that phones will access when using IAX2 protocol. Phones that are on the same network as your PBX typically use the default port, while phones that are outside the local network may utilize port-forwarding to use a different port. There is no default value, so IAX2 phones will not workif this field is left blank.
epm.host_settings.http_port = HTTP Port
epm.host_settings.http_port.tooltip = HTTP Port, typically 80, is the port that IP phones will use for HTTP access. Phones that are on the same network as your PBX typically use the default port, while phones that are outside the local network may utilize port-forwarding to use a different port. There is no default value, so HTTP access will not be enabled if this field is left blank.
epm.host_settings.https_port = HTTPS Port
epm.host_settings.https_port.tooltip = HTTPS Port, typically 443, is the port that IP phones will use for HTTPS access. Phones that are on the same network as your PBX typically use the default port, while phones that are outside the local network may utilize port-forwarding to use a different port. There is no default value, so HTTPS access will not be enabled if this field is left blank.
epm.host_settings.server_settings = Server Settings
epm.host_settings.host_settings = Host Settings
epm.host_settings.table.name = Name
epm.host_settings.table.hostname_ip = Hostname / IP Address
epm.host_settings.table.sip_port = SIP Port
epm.host_settings.table.iax_port = IAX2 Port
epm.host_settings.table.http_port = HTTP Port
epm.host_settings.table.https_port = HTTPS Port
epm.host_settings.table.server_settings = Server Settings
epm.host_settings.edit = Edit
epm.host_settings.edit_server_settings = Edit Server Settings
epm.host_settings.dns_server = DNS Server
epm.host_settings.ntp_server = NTP Server
epm.host_settings.cancel = Cancel
epm.host_settings.update = Update
epm.host_settings.warn.cannot_remove = Host setting {0} is assigned to at least one template and cannot be removed
epm.host_settings.warn.cannot_remove_default = {0} host setting cannot be removed
epm.host_settings.warn.name_not_unique = Name must be unique
epm.host_settings.warn.name_is_empty = Name cannot be empty
epm.host_settings.warn.hostname_is_empty = Hostname/IP Address cannot be empty
epm.host_settings.warn.invalid_sip_port = Invalid SIP port assigned to one or more hosts
epm.host_settings.warn.invalid_iax_port = Invalid IAX2 port assigned to one or more hosts
epm.host_settings.warn.invalid_http_port = Invalid HTTP port assigned to one or more hosts
epm.host_settings.warn.invalid_https_port = Invalid HTTPS port assigned to one or more hosts
epm.host_settings.warn.invalid_dns = Invalid DNS IP address assigned to one or more hosts
epm.host_settings.warn.invalid_ntp = Invalid NTP IP address assigned to one or more hosts
epm_template = Templates
epm.template.export = Export
epm.template.duplicate = Duplicate
epm.template.import = Import
epm.template.auto = Auto
epm.template.general_settings = General Settings
epm.template.device_buttons = Device Buttons
epm.template.expansion_modules = Expansion Modules
epm.template.advanced_settings = Advanced Settings
epm.template.templates = Templates
epm.template.warn.no_provisioner = No provisioner available for {0} {1}
epm.template.delete = Delete
epm.template.warn.confirm_delete = Are you sure that you want delete this template?
epm.template.warn.remove_template = Template is in use and cannot be deleted
epm.template.template_name = Template Name {0}
epm.template.template_name.tooltip = To simplify maintenance, each template should be identified with a unique name.
epm.template.brand = Brand {0}
epm.template.brand.tooltip = Select a Brand from the dropdown list of brands that are supported by Endpoint Manager
epm.template.model = Model {0}
epm.template.model.tooltip = Select a Model from the dropdown list of models that are supported by Endpoint Manager
epm.template.configuration_layout = Configuration Layout {0}
epm.template.configuration_layout.tooltip = Indicates what layout of configuration file you want to use. A very small number of phones may use more than one style of configuration file, depending on the firmware version that is installed.
epm.template.host_settings = Host Settings {0}
epm.template.host_settings.tooltip = Select the name of the Host Settings that you want to use in this template
epm.template.timezone = Timezone {0}
epm.template.timezone.tooltip = Select the timezone offset to be used by all phones that use this template. If you select <b>Auto,</b> the timezone will be configured in accordance with the timezone that is configured for your PBX system.
epm.template.admin_password = Administrator Password {0}
epm.template.admin_password.tooltip = Password that will be used by users to manually access the configuration interface of IP phones based on this template. You should be aware of limitations imposed by your IP Phone. For example, some IP phones will only accept the password as numeric digits. The Endpoint Manager does not validate whether the password will be acceptable by the phone, so you must refer to the manufacturer's documentation for your specific phone.
epm.template.label = Label
epm.template.type = Type
epm.template.value = Value
epm.template.line = Line
epm.template.link = Link
epm.template.select_brand_and_model = Select a Brand and Model in the General Settings tab
epm.template.model_has_no_dss_buttons = The model does not support DSS buttons
epm.template.dss_buttons = DSS Buttons
epm.template.label.buttons_type = {0} Buttons
epm.template.line_buttons = Line Buttons
epm.template.model_has_no_exp_modules = This model does not support expansion modules
epm.template.select_module_to_attach = Select module to attach
epm.template.add_module = Add Module
epm.template.attach_modules = Attached Modules
epm.template.settings_groups = Settings Groups
epm.template.warn.template_empty = Template Name cannot be empty
epm.template.warn.no_brand_selected = No Brand selected
epm.template.warn.no_model_selected = No Model selected
epm.template.warn.no_configuration_selected = No Configuration selected
epm.template.warn.no_host_selected = No Host selected
epm.template.warn.no_timezone = No Timezone selected
epm.template.warn.no_admin_password = Administrator Password cannot be empty
epm.template.warn.duplicate_template = Template Name already exists
epm.template.request_support = Request Support
epm.template.request_support_for_model = Request support for model
epm.template.request_support.tooltip = Clicking this link will open a new page where support can be requested for additional brands and models.
epm.template.export.invalid_template = Template not found
epm.template.import.title = Import Template
epm.template.import.file = Import File
epm.template.import.file.tooltip = Upload an exported template file
epm.template.import.no_file_selected = No json file selected
epm.template.import.unsupported_file = The provided file does not appear to be a valid json file
epm.template.import.missing_epm_fields = The following epm_fields were not found in the configuration:<br>{0}
epm.template.import.invalid_combo = Brand '{0}' or model '{1}' or configuration layout '{2}' not found
epm.template.import.invalid_timezone = Timezone '{0}' not found for {1} {2}.
epm.template.import.duplicate_name = Template '{0}' already exists for {1} {2}, name must be unique.
epm.template.import.invalid_settings = The following settings were not found in the configuration of {0} {1} - {2}:<br>{3}
epm.template.duplicate.title = Duplicate Template
epm.template.duplicate.invalid_template = Invalid template
epm.template.duplicate.duplicate_name = Template Name already exists
epm.device_modal.title = Configuring {0} - {1} - {2} - {3}
epm.device_member.device_id.invalid = Invalid device
epm.device_member.extension_id.invalid = Extension needs to be valid and unique
epm.device_member.index.invalid = Index needs to be valid and unique
epm.template.setting_name = Setting Name
epm.template.setting_group = Setting Group
epm.template.setting_value = Value
