dhcpsettings = DHCP Settings
dhcpsettings.days = Days
dhcpsettings.dns_primary = Primary DNS
dhcpsettings.dns_primary.tooltip = Domain Name System (DNS) translates Internet host names to physical IP addresses in numerical notation, i.e. from mypbx.mydomain.com to 67.67.222.220
dhcpsettings.dns_secondary = Secondary DNS
dhcpsettings.dns_secondary.tooltip = Define a secondary DNS to be used if your primary DNS fails to respond
dhcpsettings.enabled = DHCP
dhcpsettings.enabled.0 = Disabled
dhcpsettings.enabled.1 = Enabled
dhcpsettings.enabled.tooltip = Set to Enable if you want the PBX system to act as a DHCP server for this network, or Disable if you already have a DHCP server on this network
dhcpsettings.exclude = Disabled Interfaces
dhcpsettings.exclude.tooltip = You can disable DHCP on one or more interfaces. If you wish to specify multiple interfaces, separate them by a comma, e.g. eth0,eth0.201
dhcpsettings.gateway = Gateway
dhcpsettings.gateway.tooltip = Default IP gateway address
dhcpsettings.general = General
dhcpsettings.hostname = Hostname (optional)
dhcpsettings.host = Hostname
dhcpsettings.hours = Hours
dhcpsettings.ip = IP Address
dhcpsettings.leases = Static Leases
dhcpsettings.lease_time = Lease Time
dhcpsettings.lease_time.tooltip = Period that the DHCP server grants an IP address to a device. The device must renew its IP address before the lease period expires.
dhcpsettings.mac = MAC Address
dhcpsettings.minutes = Minutes
dhcpsettings.ntp = NTP Server
dhcpsettings.ntp.tooltip = Network Time Protocol (NTP) is a protocol to synchronize clocks between computer systems over the Internet. Enter the address of the NTP server that you want to use to synchronize the clock of the PBX server.
dhcpsettings.opt66_epm = Use for Endpoint Manager
dhcpsettings.opt66_epm.tooltip = Automatically format the Option 66 address for Endpoint Manager based on the address provided for Option 66 above. This will be done by prefixing http:// to the Option 66 address above and appending /xepm-provision/ to the address. In order for this to work correctly, the IP address provided above for Option 66 should only consist of the IP address or hostname of the server.
dhcpsettings.range_end = End Address
dhcpsettings.range_end.tooltip = The last address on your network that can be allocated as a dynamic IP address
dhcpsettings.range_start = Start Address
dhcpsettings.range_start.tooltip = The first address on your network that can be allocated as a dynamic IP address
dhcpsettings.seconds = Seconds
dhcpsettings.tftp = Option 66
dhcpsettings.tftp.tooltip = Option 66 provides IP phones with an URL for configuration provisioning. Endpoint Manager provides the IP phones with configuration information in response to a HTTP request. The format of the request URL in this case looks like http://[pbx-ip-address]/xepm-provision/. If you define the PBX IP address or host name in the Option 66 field and check the 'Use for Endpoint Manager' check-box then the correct format of the URL will be built automatically. If you have already-prepared IP phone configuration files located in the /tftpboot directory then you should put the PBX IP address or host name in the Option 66 field and uncheck the 'Use for Endpoint Manager' check-box.
dhcpsettings.validation.dns_primary = Invalid Primary DNS
dhcpsettings.validation.dns_secondary = Invalid Secondary DNS
dhcpsettings.validation.empty_ip = IP address is empty
dhcpsettings.validation.ending_address = Ending Address must be set and valid
dhcpsettings.validation.gateway = Gateway Address must be valid
dhcpsettings.validation.host = Invalid number of Hosts
dhcpsettings.validation.invalid_host = Invalid Hostname. Must contain only digits, letters and "." or "-" signs. <br>Cannot start with either "." or "-" and must not end with "-"
dhcpsettings.validation.invalid_ip = Invalid IP address
dhcpsettings.validation.invalid_mac = Invalid MAC address. Must contain only digits and/or letters separated by one of: ":", "." or "-"
dhcpsettings.validation.lease_time = Lease Time must be set and valid
dhcpsettings.validation.lease_unit = Lease Unit must be either seconds, minutes, hours or days
dhcpsettings.validation.mac = One or more duplicate MAC addresses
dhcpsettings.validation.lease_mac = One or more duplicate MAC addresses
dhcpsettings.validation.lease_ip = One or more duplicate IP addresses
dhcpsettings.validation.ntp = Format of NTP Server Address must be valid
dhcpsettings.validation.starting_address = Starting Address must be set and valid
dhcpsettings.validation.tftp = Option 66 For Endpoint Manager, set Option 66 to either hostname or an IP address
dhcpsettings.validation.wins = WINS address must be valid
dhcpsettings.wins = WINS
dhcpsettings.wins.tooltip = Windows Internet Name Service (WINS) is a name resolution service that maps NetBIOS names to an IP address on networks that uses NetBIOS over TCP/IP. The primary purpose of WINS is to support clients that run older versions of Windows and applications that use NetBIOS.
menu.dhcp_settings = DHCP Settings
module.dhcpsettings = DHCP Settings
dhcpsettings.lease_enabled = Enabled
